"Porto Spans"

Hello folks,
I've had several requests to do a run of my Porto Spans, so here they are.
The Porto Span is a tool for adjusting the pivot tension on a Strider knife. It is made from 316 series Stainless Steel and features both the spanner for the large Strider knives (NOT FOR THE PT MODEL) as well as an 1/8 hex wrench. The two halves screw together using a 1/4-28 thread with an "O" ring at the bottom of the thread to keep debris out. Dimensions are 3/8 thick x 5/8 wide x 1 & 3/8 long.

 ATTENTION PLEASE:

If  you have not adjusted the pivot on your Strider knife before, I suggest that you hold the end of the knife with the pivot pin in very hot if not boiling water for a minute to loosen any thread lock (Loctite) that the good folks at Strider may have applied.

USA price is $80.00.

Other worldly destinations, your price is $97.00.

Pay Pal fees, & Shipping are inclusive.

A USPS Money Order is acceptable as well.

Please send an Email to jordanmetalart@gmail.com if you'd care to make a purchase.

Thanks for dropping by,

Kenn

"Lanterns"

Good evening all,
Up for your consideration I have a few more Lanterns available.
This will be it for Lanterns for some time. I really need to move on to other projects.
Okay then, here's what we have for this installment:
Specs: .384 diameter * 1.343 in length featuring a 3mm*23mm Self Lighting Gas Vial.
0 Bronze Lanterns with Ice Blue vials.
0 Bronze Lanterns with Green vials.
 !! ALL SOLD!!......this has to be a record!!
0 Brass Lanterns with Ice Blue vials.
0 Brass Lanterns with Green vials. 
USA price is $95.00 each.
OCONUS price is $107.00 each.
Pay Pal fees, and USPS Priority Mail are Inclusive.
Interested? I ask that you send an Email to jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
Thanks everyone, and have a great Memorial Day weekend.
Kenn

Bronze is the upper one & Brass below.

"Damascus Whistle Sign Up Sale"

Hey all,
Let's have another Sign Up Sale this evening.
Please read the following text carefully. 
If you're interested in the items offered, I ask the you Email jordanmetalart@gmail.com
In the "Subject" field type "SUS".
I'll respond to Emails in the order received, and reply to each with an entry number.
This is your entry number for the SUS. One entry per person.
Shortly after I close sign ups, I'll then use a random number generator to choose the winners.
I'll post the winning numbers here on the Blog, and Email the winners with payment info.
*************************************************
Tonight's offering: 
Two Stainless Twist Pattern Damascus Whistles.
Physical specs: .384 diameter * 1.250 in length. 
The reed I made from clear Lucite.
103 dB was the average loudness achieved with my meter.
Only 3 were made, and I do not intend to incorporate these into the JMA lineup.
This SUS will have 2 winners.
USA price $125.00
OCONUS price $137.00
Pay Pal fees, and S/H inclusive.
Sign up is Closed....
Winning numbers are 4 & 12.

Tell your Mum I said Happy Mothers Day,
Kenn

"Moku-Ti Lantern Sign Up Sale"

Well hello again,
Hot on the heels of the "1st. Ever SUS", let's try another.
Please read the following text carefully. 
If you're interested in the items offered, I ask the you Email jordanmetalart@gmail.com
In the "Subject" field type "SUS".
I'll respond to Emails in the order received, and reply to each with an entry number.
This is your entry number for the SUS. One entry per person.
Shortly after I close sign ups, I'll then use a random number generator to choose the winners.
I'll post the winning numbers here on the Blog, and Email the winners with payment info.
*************************************************
Offered today are a two Moku-Ti Lanterns.
Physical specs: .384 diameter * 1.348 in length. 
Each Lantern features a Green 3mm * 23mm Self Lighting Gas Vial, SS split ring, and uses a  #8-32 SS socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial. Only 4 were made, and I'm not certain I will do others in this material.
This SUS will have 2 winners.
The price on these is a reflection of the $65.00 an inch raw material cost.
USA price $185.00
OCONUS price $197.00
Pay Pal fees, and S/H inclusive.
Sign up is  Closed.
Winning numbers are #17, and #2.
Thanks folks,
Kenn

"1st. Ever Sign Up Sale"

Hey there,
Alrighty then, we're going to try something new in an attempt to give everyone an equal opportunity at limited quantity items.

Please read the following text carefully. 
Here's how the Sign Up Sale will work.
I'll post an item with all the specs, and pricing info.
If you're interested, I ask the you Email jordanmetalart@gmail.com
In the "Subject" field type "SUS".
I'll go through the Emails in the order received, and respond to each with a number.
This is your entry number for the SUS. One entry per person.
Shortly after I close sign ups, I'll then use a random number generator to choose the winner/winners.
I'll post the winning numbers here on the Blog, and Email those chosen with payment info.
That's it......sounds easy eh?

 *****************************************************************

Are you ready?
Good, let's give this format a try then.
Up for consideration is a one off Lantern, yep it's the only one.
The material is a Stainless Steel Twist pattern Damascus forged by Chad Nichols.
Physical specs: .384 diameter * 1.348 in length.
This Lantern features three 2mm * 8mm Green Self Lighting Gas Vials evenly spaced about the circumference, a Green glow dot adorns the bottom, and a SS split ring.
USA price $140.00
OCONUS price $152.00
Pay Pal fees, and S/H inclusive.
Sign up is **CLOSED with 30 entrants** Bear with me a few moments whilst I randomly generate....
And the lucky number is #13, congratulations. 
Giddy up,
Kenn

"Another Run Of Damascus Lanterns"

Hello everyone,
Today I have another run of Damascus Lanterns all set to go.
The material is a Stainless Steel Twist pattern Damascus forged by Chad Nichols.
Physical specs: .384 diameter * 1.348 in length. 
Each Lantern features a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 SS socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
After the machining process these are polished up, and then given a dip in Ferric Chloride for etching which brings out the pattern inherent to the material.
This Sale is One Per Person, let's spread the joy of these around.
Here they are: 
0 with Green vials. !!Sold!!                                  
0 with Ice Blue vials. !!Sold!!
USA Price on these is $140.00 each, with Pay Pal fees, and USPS Priority Mail Inclusive.
OCONUS folks please add $12.00.
I ask that you send an Email to jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.Thanks for your support,
Kenn

Pssst.....

Hey all,
Just wanted to let you know I have a sale planned for this evening.
Post time, somewhere between 8 or 9 EST.
Damascus Lanterns are what's on the menu.
Thanks for checking in,
Kenn

"Ti Lights"

Okay then,
Now that those silly Damascus pieces are out of the way, I have a few "Ti Lights" ready to go today as well.
These are made from 6AL4V Titanium, and feature a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
Physical specs: .384 diameter * 1.348 in length.
Here they are: and please tell me your preference!!
0 Tropical anodized with a Green SLGV. !!Sold!!
0 Two tone anodized Gold/Blue with an Ice Blue SLGV. !!Sold!!
0 Spectrum anodized with a Green SLGV. !!Sold!!

Price on these is $105.00 each, with Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS folks please add $12.00.
Email me at jordanmetalart@gmail.com if you'd like to make a purchase & to confirm availability.
Thanks folks,
Kenn

"Damascus Lanterns"

Hello again,
Today for your consideration I have a few Lanterns available.
The material is a Stainless Steel Twist pattern Damascus forged by Chad Nichols.
Physical specs: .384 diameter * 1.348 in length. 
Each Lantern features a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 SS socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
I'm also including a 15mm long SS gated McGizmo clip with these.
After the machining process these are polished up, and then given a dip in Ferric Chloride for etching which brings out the pattern inherent to the material.
Since I have so few of these, this is a one per person sale.
0 with Green vials. !!Sold!!
0 with Ice Blue vials. !!Sold!!
USA Price on these is $140.00 each, with Pay Pal fees, and USPS Priority Mail Inclusive.
OCONUS folks please add $12.00.
I ask that you send an Email to jordanmetalart@gmail.com if you'd like to make a purchase, and to confirm availability.
Thanks so much folks, Oh & stay tuned as I'm attempting a 2 Sale day....:)
Kenn

"Red Brass Triple Cubes"

Happy Saturday all,
Well I decided to revisit the "Red Brass Triple Cubes" this round.
I haven't done these in awhile, and get frequent requests for them, so here they are.
Specs:
Made From 1 inch square Red Brass stock finished to .900 X .900 X .900.
It's a cube inside a cube inside a cube eh.
Great for use as a key fob, zipper pull or what have you.

!!Sold Out!!

USA price is $36.00.
OCONUS is $44.00.
Any additional ones in your order are just $30.00 each.
As always the price includes Pay Pal fees & Sipping.
Please send an Email to: jordanmetalart@gmail.com if you'd care to make a purchase.
Thanks for checking in,
Kenn

"Nothing To See Here"

Howdy all,
Just wanted to let you know you can rest your "f5" keys for a bit.
Nothing coming up for sale in the near future.
I will be at the shop all weekend, as there is finally an opening in a Machining Center for me to start the S30V run of Butcherettes.
Have a great weekend folks,
Kenn

"Ti Lights, Part Deux"

Hey again,
Today I have the remainder of the new version "Ti Lights" ready to go.
These are made from 6AL4V Titanium, and feature a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
Physical specs: .384 diameter * 1.348 in length.
Here they are:
0 Sporting a plain satin Scotch Brite finish.with a Green SLGV. !!Sold!!
0 Sporting a plain satin Scotch Brite finish.with an Ice Blue SLGV. !!Sold!!
0 Green anodized with a Green SLGV. !!Sold!!
0 Blue anodized with an Ice Blue SLGV.!!Sold!!
0 Tropical anodized with a Green SLGV. !!Sold!!
Price on these is $105.00 each, with Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS folks please add $12.00.
Email me at jordanmetalart@gmail.com if you'd like to make a purchase.
I thank you kindly,
Kenn

"Ti Lights"

Hello all,
Today for your consideration I have my latest version of "Ti Lights".
These are made from 6AL4V Titanium, and feature a 3mm * 23mm Self Lighting Gas Vial, SS split ring, and use a  #8-32 socket set screw for captivation of the vial. The set screw has been drilled through for additional viewing of the vial.
Physical specs: .384 diameter * 1.348 in length, sporting a plain satin Scotch Brite finish this round.
I really dig the size of these, and feel they are perfect for key chain carry, as zipper pulls, or what have you.
Here's what I have ready for this evening: (yeah, it's a hint, there will be more tomorrow)
0 with Green SLGV's. !!Sold!!
0 with  Ice Blue SLGV's. !!Sold!!
Price on these is $105.00 each, with Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS folks please add $12.00.
Email me at jordanmetalart@gmail.com if you'd like to make a purchase.
I thank you kindly,
Kenn

"A Few More From The Abyss"

Howdy folks,
I found a few more goodies for your consideration.
This about wraps it up for my Spring cleaning, so let's get right to it then.
0 Aluminum Spoolie one of five produced.....$35.00. !!Sold!!
0 Red Brass one off prototype Spoolie....$50.00. !!Sold!!
0 Prototype Field Hone Titanium with a Carbide hone, one of two produced....$50.00. !!Sold!!
0 Spectrum anodized Bic Buddy....$35.00. !!Sold!!
0 Ultra Violet anodized Titanium Mini Triple Cube....$35.00. !!Sold!!
Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS add $12.00 please.
Email me at jordanmetalart@gmail.com if you're interested in something.
Kenn

"Bic Buddy Blow Out"

Hey there all,
My Spring cleaning continues.
Today I have but a few of my "Bic Buddies" available.
Made from Grade 2 commercially pure Titanium with a bead blast finish, and anodized in various colors. They press onto the end of the regular size Bic lighters, and feature a wee regular screwdriver bit.
Using the fulcrum method these make a nice bottle opener while protecting the lighter from chipping.
Each one comes with the SS split ring as in the photo, and a brand new Bic Lighter.
0 Blue anodized. !!Sold!!
0 Green anodized. !!Sold!!
0 UV/Chocolate/Greenish anodized...??? !!Sold!!

Originally priced at $60.00 for USA folks, now at a new "Blow Out" price of $35.00.
Oconus, your price is $47.00.
Price includes Pay Pal fees, and USPS shipping.
Please send an Email to jordanmetalart@gmail.com if you're interested.
Thanks for checking in,
Kenn

"V2 Tropical Anodized Ti Drives"

Well hello again,
This afternoon I have a couple of "Version 2 Ti Drives" available.
These have been in my goody box for some time now, and I recently ran across them again.
Since the housings are Titanium, I decided to try my hand at a "Tropical" anodize.
While the pictures don't do them justice, I'm quite pleased with how they came out, and trust you will be as well.
The innards are a Sandisk 16Gb Cruzer Flash Drive, plenty of space to hold all your pics, CIA documents & even videos;)
Included is the Stainless split ring.
I have 0 available. !!Sold!!
USA Pricing is $115.00 with Pay Pal fees & USPS Priority Mail inclusive.
OCONUS price is $127.00 with Pay Pal fees & USPS Priority International Mail inclusive.
USPS Money Orders are accepted as well.
Please send an Email to jordanmetalart@gmail.com  if you're interested.
Thanks for having a look,
Kenn

"Titanium Butcherettes"

Hello all,
Up for consideration today I have the "Ti Butcherettes".
These are made of 6AL4V Titanium.
.125 thick * 1.000 * 3.000 length with a 1.250 long cutting edge.
Each Butcherette comes with a Kydex sheath made by David Brown, and includes a length of #3 Stainless Steel bead chain.
All have been tumbled for a nice stonewashed finish, and  after anodizing the back edges were carbidized to help keep a keen edge.
Here's what's available:
0 Plain stone washed finish. !!Sold!!
0 Blue anodized. !!Sold!!
0 Ultra Violet anodized. !!Sold!!
0 Gold anodized. !!Sold!!
0 Spectrum anodized. !!Sold!!
0 Green anodized. !!Sold!!
USA Pricing is $125.00 each with Pay Pal fees & USPS Priority Mail inclusive.
OCONUS price is $132.00  with Pay Pal fees & USPS Priority International Mail inclusive.
USPS Money Orders are accepted as well.
Please Email me at jordanmetalart@gmail.com to make a purchase.
Any weird looking marks you see in the photos are just from my grubby hands, rest assured each will be cleaned & inspected prior to shipping. I'm just running behind today;)
Thanks folks,
Kenn

"What's Going On?"

Hello,
Thought I'd let you all know what I'm up to here.
I'll be posting the Titanium Butcherettes for sale Saturday 2/25 late afternoon, early evening EST.
The S30-V versions are a couple months away.
Also in the works will be a variant of the "Ti Lights", and a neat little multiple function key chain tool is coming as well.
While all this is going on, I'll be finalizing the next knife design too.
I don't want to go into too much detail, but it's looking like it'll be a friction folder.
Thanks for checking in,
Kenn

"The End Of The Run, This Is It"

Hello all,
While I have your attention, I'd like to thank everyone for your tremendous support.
 I couldn't believe how fast these sold with each posting.
Alrighty then here they are, the last of the Nebuli SE's:
All  of the Nebuli feature a CPM S30-V blade, and a one piece Titanium integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
0 Standard model Nebuli SE  $315.00. !!Sold!!
0 Nebuli SE's with a blue twill carbon fiber "teardrop" inlay,  and a blue custom Titanium thumb disk. $365.00.!!Sold!!
0 Nebuli SE's with a blue twill carbon fiber "teardrop" inlay, blue glow lock bar, and a blue custom Titanium thumb disk. $375.00. !!Sold!!
0 Nebuli SE with Blue Twill C/F flame inlay ,and a custom Titanium thumb disk anodized Blue . $415.00. !!Sold!!
Prices are for USA, Pay Pal fees, and USPS Priority Mail Inclusive.
OCONUS add $12.00 please. USPS recently increased their rates:(
Please note, that I'm not responsible for OCONUS items once they hit the PO.
OCONUS shipping is via USPS Priority International mail.
Email me at jordanmetalart@gmail.com to make a purchase.
Please include the model type you're interested in within your correspondence.  

Remember folks,
The Nebuli model is being retired, so get em while you can...:)
I thank you much,
Kenn

"Nearing The End Of The Run"

Ah, S.B. Sunday....Go Patriots!!
Truth be told, I just want to see a great game that could go either way right up to the end.
Now that that's out of the way, I have a few more Nebuli SE's ready to go.
I'm nearing the end of the run, so if you've been wanting one, now would be the time to act.
All  of the Nebuli feature a CPM S30-V blade, and a one piece Titanium integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
Pictured front to back:
0 Nebuli SE with hand rubbed Scotch Brite satin finish featuring a  Green Glow Spine, and a wee Green Self Lighting Gas Vial in the lock bar. $335.00 !!Sold!!
0 Nebuli SE with hand rubbed Scotch Brite satin finish featuring a  Blue Glow Spine. $325.00 !!Sold!!
0 Nebuli SE with hand rubbed Scotch Brite satin finish featuring an  Orange Glow Spine. $325.00 !!Sold!!
Prices are for USA, Pay Pal fees, and USPS Priority Mail Inclusive.
OCONUS add $12.00 please. USPS recently increased their rates:(
Please note, that I'm not responsible for OCONUS items once they hit the PO.
OCONUS shipping is via USPS Priority International mail.
Email me at jordanmetalart@gmail.com to make a purchase.
Please include the model type you're interested in within your correspondence.
Thank folks,
Kenn

"The Bar Has Been Raised"

Hey kids,
Check these out!!
Nebuli SE's with Blue Twill Carbon Fiber flame inlays.
I haven't mentioned that I would be attempting  this, as I wasn't sure I'd be able to pull it off.
The C/F is .040 thick, and was machined on double sided tape with a .030 diameter carbide end mill.
I roughed the pocket in the frame with a .0625 mill, and finished it with the .030 mill.
It took all of yesterday, and today to finish these up.
I'm really pleased with the end results, so I'll be keeping one of the four right here for posterity;)
Today's offering:
All  of the Nebuli feature a CPM S30-V blade, and a one piece Titanium integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length. 

0 Nebuli SE's with Blue Twill C/F flame inlay ,and a custom Titanium thumb disk anodized Blue . $415.00. !!Sold!!

Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS add $12.00 please. USPS recently increased their rates:(
Please note, that I'm not responsible for OCONUS items once they hit the PO.
OCONUS shipping is via USPS Priority International mail.
Email me at jordanmetalart@gmail.com to make a purchase.
Please include the model type you're interested in within your correspondence.
Thank you all,
Kenn

"Heads Up On This Evenings Sale"

Hi Folks,
There will be a handful of Nebuli SE's up for sale this evening.
Even if you're not in the market for one, I suggest you tune in to see what I've come up with for a new "Specail" feature. I'm really excited about these
I'm at the shop now adding the finishing touches, so sometime between 6, or 8 o'clock I'll post em up.
Enjoy your day,
Kenn

EDIT: Looks like it'll be close to 8:00 for the sale. 

"Nebuli SE's"

Good afternoon all,
The weather is a bit better here today, so let's get you all some knives:)
The pictures are poor. My Wife & Daughter were headed out to sell girl Scout cookies at a local grocery, and wanted the camera. Hence I wasn't able to take my usual 50-60 shots to get 1 good one...lol
Today's offering:
All  of the Nebuli feature a CPM S30-V blade, and a one piece Titanium integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 long closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
0 Lefty with checkered scales, and Self Lighting Gas Vial lock bar. Ice Blue will be the vial color. $365.00. !!SOLD!!
0 Lefty standard plain model. $315.00.!!SOLD!!
0 With checkered scales, and Self Lighting Gas Vial lock bar. Ice Blue will be the vial color. $365.00. !!SOLD!!
0 Standard plain model. $315.00.!!SOLD!!
0 With S.E.T.I. scale, note that the feature is only on one side. $350.00. !!SOLD!!

Pay Pal fees, and USPS Priority Mail Inclusive.
Prices are for USA, OCONUS add $10.00 please.
Please note, that I'm not responsible for OCONUS items once they hit the PO.
OCONUS shipping is via USPS Priority International mail.
Email me at jordanmetalart@gmail.com to make a purchase.
Always appreciative,
Kenn

"Danged Weather"

Hello,
Well being New England we're having some Winter weather here.
Due to this my Satellite Internet is being very spotty, with little to no connectivity.
So with that said, we'll have a nice Nebuli SE sale tomorrow afternoon.
There will be 8 possibly 9 available (one keeps calling my name).
2 are "Lefy" models.
My apologies for the let down.
Now it's time for me to climb on my Wheeler & plow the driveway.
Kenn

"Nebuli SE Watch"

Hey there all,
I managed to finish up all the remaining blades for the Nebuli SE's this week.
I'm headed to the shop in the AM to assemble like a mad man;)
So, be on the lookout late Saturday, and again on Sunday for some offerings.

Now What's a post without a picture eh?
Just want to show off what I came up with for air distribution on a custom heater box that my Boss made for his hot rod.
Machined in .090 thick Aluminum.
I'm quite pleased with the results.
Once it's installed under the dash, you'll only see the lower section.
Thanks for looking,
Kenn